English
Français
Deutsch
Español
Italiano
Português
日本語
한국어
Русский
High Performance Rheometer Air-Driven Rotor for Food Drug Cosmetics
Overview Product Description The Rheometer is specially used to measure the rheological properties of polymer melt, poly
Description
Basic Info
| Model NO. | RHM-20 |
| Transport Package | Wooden Case |
| Specification | RHM-20 |
| Trademark | SRI |
| Origin | China |
| HS Code | 9031809090 |
| Production Capacity | 200sets/Month |
Product Description
The Rheometer is specially used to measure the rheological properties of polymer melt, polymer solution, suspension, lotion, paint, ink and food. It is divided into rotary rheometer, capillary rheometer, torque rheometer, and interface rheometer.The Rheological performance measurement serves as a bridge between the molecular weight, molecular weight distribution, branching degree, and processing performance of polymers, providing a direct connection to assist users in raw material inspection, processing process design, and predicting product performance.
Air-driven rotor
Normal force sensor
Optical coder
Speed fully controlled in digital
Easy to learn and operate, durable, safe and reliable;
User defined operating procedures to meet user specific testing needs;
Automatic testing can be achieved without computer connection;
Automatic speed and temperature control ensures the accuracy and repeatability of the results;
Automatic calibration function makes the calibration process simple and fast;
Oil drilling mud inspection
Rheological properties of biodegradable materials
Asphalt performance evaluation
Thixotropy experiment of waxy crude oil;
Rheological properties of colloidal liquid foam;
The rheology of low-temperature gel type plugging agent solution.
2. Maximum torque: ≥ 200 mN. m
3. Torque resolution: ≤ 0.1 Nm
4. Motor inertia: ≤ 12 μ Nms
5. Angular displacement resolution: ≤ 15 nrad
6. Oscillation frequency: 10-4 Hz~100Hz
7. Maximum normal force: 50 N
8. Electric heating concentric cylinder temperature range: room temperature -300 ºC
9. Liquid temperature control concentric cylinder temperature range: -30-200 ºC
10. Maximum speed: ≥ 4500 rpm
Test mode1. Flow curve of dispersed liquid
The following figure shows a typical dispersion flow curve. Rheology only obtains the flow curve by applying stress (or shear rate) and measuring shear rate or stress, or by steady-state experiments, measuring a viscosity at each equilibrium constant stress to obtain the flow curve. From this, information on yield stress, viscosity, shear thinning, and thixotropic loops can be obtained, which is related to various phenomena in the real world.
2. Flow curve of polymers, study on rheological properties of polymers, viscoelasticity
2.1 Flow curve of polymers
This figure shows the typical flow curve of polymers and the corresponding shear rate range of the process. The molecular weight of polymers has a significant impact on viscosity, and the molecular weight distribution and branching degree have a significant impact on the shear rate dependence. This difference can only be reflected at low shear rates, and the adhesion index and capillary rheometer are powerless. The RHM-20 rheometer can analyze molecular weight and molecular weight distribution through viscoelastic properties and flow curves, while the Cox-merz law and TS law can extend the data to higher shear rates.
2.2 Rheological properties study of polymers
2.3 Viscoelasticity
The viscoelasticity of polymers is usually measured using a dynamic oscillation mode. The following figure shows the viscoelastic curve (main curve) of a linear polymer, representing the changes in elastic modulus G and loss modulus G. Due to the viscoelasticity of polymer melts and the time-dependent mechanical response, they correspond to long-term responses in the low frequency range. TTS can be used to expand data to high and low ranges. The shape and size of G and G "are related to the molecular structure of polymer.
3. Strain-scan mode
Test key viscoelastic parameters (G, G °, n, Tan6, etc.) in oscillation mode as functions of stress, strain, frequency, temperature, and time. The following figure shows the starting point of nonlinear viscoelastic behavior determined using dynamic strain scanning. In the linear viscoelastic region Within the LVR range, the material exhibits a linear response to applied stress or strain, with the elastic modulus G and loss modulus G independent of strain. The internal structure of the material remains intact under linear testing conditions. Beyond the linear viscoelastic range, the material's response is completely nonlinear. The dynamic modulus G and G ° rapidly decrease with increasing strain and undergo modulated stress. Under high strain testing conditions, the internal structure of the material is completely destroyed. In the nonlinear zone, the material's response is completely nonlinear Rheology analysis using wave modulation is called "Fourier rheology".
4. Creep and stress relaxation
In the creep recovery experiment shown in the figure below, a constant stress is applied to the sample, and the strain generated varies with time. Subsequently, the stress is relieved, and the recovery strain is measured. For polymer melts, zero shear viscosity and equilibrium recovery flexibility can also be obtained. The RHM-20rheometer is a very suitable and sensitive method for measuring creep performance. The stress relaxation experiment involves applying strain to a sample, measuring the subsequent changes in stress over time, and measuring the stress relaxation modulus G (t).
5. Stress and shear rate scan
The stress and shear rate scanning experiment is the most widely used state experiment to easily and quickly determine the yield stress and thixotropic behavior of materials. These two phenomena are time-dependent behaviors of typical structural fluids and can help understand the performance in material applications. Stress scanning is a typical method for testing fluid stress in structures. The stress changes linearly with time, while recording the transient viscosity of the strain. As shown in the figure below, the viscosity initially increases and then reaches its maximum value. The surrounding point of the stress value at the maximum viscosity is the yield value. After exceeding the maximum value, as the stress increases, the structure of the material is destroyed, and the witherness decreases or the shear becomes thinner. Shear rate scanning is commonly used to investigate thixotropic behavior, and the testing process includes the process of shear rate from zero to the final rate and returning to zero, which forms a thixotropic loop. The magnitude of stress during the descent process is lower than that during the ascent process. The ascent and descent curves are functions of the shear rate, known as the thixotropic index.
6. Stress growth experiment under transient step rate
For the rheometer, the most challenging rheology test is to measure the transient viscosity and the first normal force coefficient of a viscoelastic material using a cone plate. The instrument must have a very low axial flexibility to minimize secondary flow that affects the normal force. Rheology only uses high axial hardness air bearings and non yield force rebalancing sensors to reduce axial motion, with a maximum flexibility of only 0.1um/N. The following figure shows the results of a series of step rate tests, with shear rates ranging from 0.1-100S-1. From these results, it can be seen that the rheometer can easily handle challenging experiments. At all shear rates, the transient viscosity and the first normal stress difference coefficient overlap well in a short period of time. As the viewing time increases, at the shear rate, the nonlinear response of the material leads to the separation of viscosity and normal stress difference. The overshoot of viscosity and first normal stress difference coefficient is caused by the internal structural changes of the material under strong shear.
7. Dynamic Mechanical Testing of Solid Torsion
The rheometer can study the viscoelastic properties of solid materials through solid torsion. The figure below shows the viscoelastic characteristic curve of carbonic acid (PQ). The transformation and relaxation of molecular chain segments show step changes on the elastic transverse star curve, and the loss peak appears on the loss modulus curve. The size and shape of the elastic modulus G, loss modulus G, damping factor (Tan) curve are related to the chemical composition, crystallinity, molecular structure The degree of crosslinking is related to the type and content of the filler.
Our Contact
Send now
