Fibrous hydrogels under biaxial confinement

Nature Communications volume 13, Article number: 3264 (2022) Cite this article

3250 Accesses

1 Citations

5 Altmetric

Metrics details

Confinement of fibrous hydrogels in narrow capillaries is of great importance in biological and biomedical systems. Stretching and uniaxial compression of fibrous hydrogels have been extensively studied; however, their response to biaxial confinement in capillaries remains unexplored. Here, we show experimentally and theoretically that due to the asymmetry in the mechanical properties of the constituent filaments that are soft upon compression and stiff upon extension, filamentous gels respond to confinement in a qualitatively different manner than flexible-strand gels. Under strong confinement, fibrous gels exhibit a weak elongation and an asymptotic decrease to zero of their biaxial Poisson's ratio, which results in strong gel densification and a weak flux of liquid through the gel. These results shed light on the resistance of strained occlusive clots to lysis with therapeutic agents and stimulate the development of effective endovascular plugs from gels with fibrous structures for stopping vascular bleeding or suppressing blood supply to tumors.

Fibrous networks are a major structural and functional component of tissue and living cells. Actin is the main element of the cytoskeleton1; fibrin is a crucial element of wound healing and thrombosis2, and collagen, elastin, and fibronectin are the constituents of the extracellular matrix in the animal kingdom3. Reconstituted networks of fibrous biopolymers have emerged as materials with a broad range of applications in tissue engineering4.

Filamentous networks represent a distinct class of biological soft matter, with mechanical properties that are distinct from those of networks of flexible molecules5. Some of these properties have developed during the course of evolution to control the response of biological matter to deformation6. For example, fibrous networks show linear elasticity at small strains7,8, while at larger deformation, they exhibit an increase in stiffness9,10, thus ensuring tissue integrity. The implications of other mechanical properties of fibrous gels, e.g., the negative normal stress in response to the shear strain11,12 are yet to be discovered.

The mechanical properties of semiflexible fibrous hydrogels have been studied under uniaxial stretching13,14 and compression8,15, however their confinement-induced biaxial compression in narrow capillaries or tubes has not been examined. Here, we report experimental findings and propose theoretically the mechanism of the behavior of fibrous hydrogel under biaxial confinement in a microfluidic channel.

Fibrin microgels with varying fibrinogen-to-thrombin concentration ratio and diameter, D0, from 150 to 220 μm were generated using a microfluidic approach (Supplementary Fig. 1). Figure 1a shows a confocal fluorescence microscopy (CFM) image of fluorescent dye-labeled microgels. The microgels had a spherical shape, polydispersity below 5%, and a uniform structure on the scale examined by CFM (Supplementary Information and Movies S1 and S2). The mean pore size of the microgels (determined by measuring the Darcy permeability16) reduced from 2280 to 60 nm with fibrin content increasing from 5.25 to 37.9 mg/mL and thrombin concentration reducing from 2.56 to 0.27 Unit/mL, respectively (Supplementary Figs. 2, 3 and Supplementary Table 1). The corresponding microgel stiffness increased from 0.85 to 3.6 kPa (Supplementary Fig. 4). Agarose microgels with various stiffness were used as an example of gels formed by flexible strands17.

a Fluorescence microscopy image of fluorescein isothiocyanate (FITC)-labeled RMs suspended in TBS. The scale bar is 500 μm. b SEM images of the SM (top) and RM (bottom). The scale bars are 500 nm. c Schematic of the microfluidic channel containing a channel-at-large (diameter of dl) and a constriction with the entrance angle, α, of the tapered region of 15° and a diameter, dc = 65 μm. d Left-to-right: optical microscopy images of RM (diameter of D0) in the channel-at-large, the tapered zone, and in the constriction (length of confined gel of Dz). The scale bars are 100 μm. e, f TEM images of the undeformed RM (e) and occlusive RM (f), following its one-hour confinement in the constriction at 1/λr = 2.7, subsequent release, and fixing with 5 wt% solution of glutaraldehyde in TBS. The diameter of the undeformed RM was 176 μm. The scale bar is 100 nm.

We focused on fibrin microgels with the stiffness of 0.85, 1.87, and 3.6 kPa (later in the text referred to as soft microgels (SMs), medium rigidity microgels (MMs), and rigid microgels (RMs), respectively. This range of fibrin gels stiffness was on the same order of magnitude as that reported for blood clots18,19 and therefore, fibrin gels studied in our work have direct relevance to the real biological systems. Figure 1b, top and bottom shows a scanning electron microscopy (SEM) image of the structure of SM and RM, respectively. An SM network was formed by thicker fibers with fewer branching points, in comparison with the RM structure, in agreement with earlier reports20,21 (Supplementary Fig. 5). The difference in the hydrogel structure correlated with the trend in the variation in its properties: gel permeability reduced with the decreasing pore size from SMs to MMs to RMs (Supplementary Table 1), while gel stiffness changed in the opposite order. Microgel structure did not noticeably change after 30 days of storage at 4 °C (Supplementary Fig. 6).

Figure 1c shows a schematic of the microfluidic channel with a circular cross-section, which contains (from left to right): a channel-at-large with diameter dl, in which the microgel remained undeformed, a tapered region, a constriction with diameter dc < D0, a tapered region, and a channel-at-large with diameter dl (Supplementary Fig. 7). In a typical experiment, a microgel was introduced under a positive pressure difference ΔP of 0.2–16 kPa into the microfluidic channel (Supplementary Fig. 8). This range of pressures corresponds to the biologically relevant blood pressure (120 mmHg = 16 kPa)22. Figure 1d (from left to right) shows representative images of an RM in the channel-at-large, the tapered region, and the constriction. Microgel motion and shape were recorded and analyzed using a MATLAB program. Importantly, in the tapered region and the constriction the microgel was in conformal contact with the microchannel walls (Supplementary Fig. 8). The degree of radial microgel confinement D0/dc = 1/λr in the constriction was in the range of 2.4 ≤ 1/λr ≤ 4.2, where 1/λr is the compression ratio. At ΔP > ΔPtr, the microgel passed the constriction, where ΔPtr is the translocation pressure difference. The length and the size of pores of biaxially confined microgels were determined for their equilibrated state, since accounting for gel's viscoelasticity is of utter importance in biological systems. The time of equilibration was 10 and 30 min for agarose and fibrin microgels, respectively. After these time intervals, confined microgel reached their steady-state position and shape, which were recorded with a high-speed camera and analyzed by MATLAB.

Figure 1e, f show transmission electron microscopy (TEM) images of the structure of the undeformed and biaxially confined RM. Upon RM confinement in the constriction, the size of microgel pores significantly reduced and their shape became anisotropic, with smaller dimensions in the direction of compression, in agreement with an earlier report23.

Biaxial compression in the constriction resulted in microgel elongation in the unconstrained direction by the factor λz = \({D}_{{{{{{\rm{z}}}}}}}\)/\({D}_{0}\), where \({D}_{{{{{{\rm{z}}}}}}}\) is the length of the confined microgel. Figure 2a shows the variation of λz vs. 1/λr for fibrin and agarose microgels. Surprisingly, for strong compression of 2.4 ≤ 1/λr ≤ 4.2, fibrin microgels exhibited an insignificant elongation λz of 1.12 + /−0.03, which was only weakly affected by the 1/λr value. Such response to biaxial confinement was in marked contrast with the behavior of confined agarose microgels, for which larger elongation λz = 1.3 was observed even at a weaker compression of 1/λr = 2.6.

a Variation in experimentally measured elongation λz of agarose microgels with various elastic moduli (2.6 kPa, green hollow diamonds; 8.3 kPa, brown hollow circles; 12.5 kPa, orange hollow squares; and 20.2 kPa, magenta hollow inverted triangles) and SM (red solid circles), MM (black solid squares), and RM (blue solid triangles). The solid lines show theoretically predicted λz of agarose (green line) and fibrin microgels (the colors of lines and symbols coincide). b, c Top: schematic of network strands of agarose (b) and fibrin (c) prior to (left) and after (right) biaxial compression. Bottom: the shapes of the corresponding networks before and after deformation. The compression directions x and y are shown by the magenta and brown arrows, respectively. In the top cartoons, the network strands oriented along these x and y directions are shown as the corresponding magenta and brown color lines, while the strands oriented in the unconstrained z-direction are depicted by green lines. In fibrin gel (c), magenta and brown strands oriented in the x and y directions are bent more than in the undeformed state, whereas the green strands oriented in the z-direction are bent and stretched. Stress between compression and stretching directions is transmitted through the filaments with intermediate orientations. In agarose gels, the strands of all orientations determine the osmotic pressure, which makes a significant contribution to gel deformation. d Predicted variation in biaxial Poisson's ratio, \({\nu }_{{{{{{\rm{b}}}}}}}^{{{{{{\rm{eff}}}}}}}=-{{{{{\rm{ln}}}}}}{\lambda }_{z}/{{{{{\rm{ln}}}}}}{\lambda }_{r}\), for equi-biaxial compression of agarose (green line) and fibrin (red line) gels. Inset illustrates biaxial deformation of gels. e Variation in the translocation pressure, ΔPtr, normalized by the gel stiffness S, plotted as a function of the compression ratio for agarose and fibrin microgels. The colors of symbols correspond to those in (a). The green and red lines depict the theoretical relationships between ΔPtr/S and 1/λr for agarose and fibrin gels, respectively. The dotted fragment of the red line shows the rise in ΔPtr at strong compression, due to inter-fiber interactions.

This difference is due to the different mechanism of deformation of fibrin and agarose microgel networks that are composed of flexible24 and stiff25 filaments, respectively. Biaxial compression of a flexible gel leads to the decrease of its volume and the related increase of concentration and osmotic pressure that results in gel elongation in the unconstrained direction. The ultimate gel elongation is determined by the balance of entropic free energy increase of extended chains and osmotic free energy decrease due to the lower polymer concentration in the extended gel17. For strong biaxial compression, gel elongation increases as λz ≈ 0.6 \({{\lambda}_{{{\rm{r}}}}^{-2/3}}\) (see the green line in Fig. 2a and Supplementary Discussion Section 5.3.3). The changes in the conformation of flexible strands prior to and after biaxial confinement and of the corresponding network shapes are illustrated in Fig. 2b.

In marked contrast, filamentous gels such as fibrin respond to biaxial confinement in a qualitatively different manner. The filaments that are predominantly oriented parallel to the compression direction, bend (thus decreasing the distance between the crosslinking points), while the filaments that are mostly perpendicular to the compression direction are straightened and stretched by elastic forces, leading to gel elongation (Fig. 2c). The structure of undeformed SMs, MMs, and RMs was characterized by analyzing their SEM and CFM images (Supplementary Discussion Section IV and Supplementary Fig. 9). By determining the elastic modulus (E), diameter (d), contour length (R0), end-to-end distance (L0 ≈ R0), and central angle (ψ0) of the filaments in the undeformed fibrin microgels (Supplementary Tables 2–4), we found that the bending filament modulus, \({k}_{{{{{{\rm{b}}}}}}}=\frac{9\pi E{d}^{4}}{4{\psi }_{0}^{2}{L}_{0}}\) is significantly smaller than its stretching modulus \({k}_{{{{{{\rm{s}}}}}}}=E\frac{\pi {d}^{2}{R}_{0}}{4}\), so that kb/ks ≈ 0.1 (Supplementary Table 4). Thus, upon biaxial confinement of a gel, fibrin filaments easily bend but resist stretching. The elongation of filamentous network subjected to biaxial compression is illustrated in Supplementary Fig. 17.

We developed a theoretical affine model (Supplementary Discussion Section V and Supplementary Figs. 10–16), in which fibrous gel elongation was determined from the local balance of elastic forces acting in the gel, and predicted strain λz −1 under strong biaxial confinement as

Equation (1) shows that even under strong compression (\({\lambda }_{{{\mbox{r}}}}\,\to \,0\)) there is a weak increase and subsequent saturation of the gel elongation strain at λz–1 = 0.15 ± 0.05. Such behavior originates from (i) the small value of \({\left({k}_{{{{{{\rm{b}}}}}}}/{k}_{{{{{{\rm{s}}}}}}}\right)}^{1/2}\) ≈ 0.15−0.4 and (ii) the term in the square brackets asymptotically approaching \(1{{\mbox{/}}}\sqrt{3}\) for strong biaxial confinement. Importantly, the prefactor \({\left({k}_{{{\mbox{b}}}}/{k}_{{{\mbox{s}}}}\right)}^{1/2}\) is independent of the filament stiffness E and is determined only by the filament aspect ratio d/L0 and central angle of an arc ψ0, which are similar for SM, MM and RM (Supplementary Table 4).

To further highlight the difference in the confinement-induced strain of flexible and filamentous gels, we introduced a biaxial Poisson's ratio \({\nu }_{{{{{\rm{b}}}}}}{{\mbox{=}}}\,\mathop{{\lim}}\limits_{{\lambda }_{{{{{\rm{r}}}}}}\to 1}\frac{{\lambda }_{{{{{\rm{z}}}}}}-1}{1-{\lambda }_{{{{{\rm{r}}}}}}},\) which describes gel deformation in the unconstrained direction in response to equal deformations in two radial directions, and extended it to large uniform deformation \({{{{{{\rm{\nu }}}}}}}_{{{{{{\rm{b}}}}}}}^{{{{{{\rm{eff}}}}}}}=-{{{{{\rm{ln}}}}}}{\lambda }_{z}/{{{{{\rm{ln}}}}}}{\lambda }_{{{{{{\rm{r}}}}}}}\). Figure 2d shows the predicted variation of \({{{{{{\rm{\nu }}}}}}}_{{{{{{\rm{b}}}}}}}^{{{{{{\rm{eff}}}}}}}\) for the uniform biaxial compression of flexible (such as agarose) and stiff (such as fibrin) gels (Supplementary Discussion Section 5.3.4) and highlights a strong difference in their response to confinement. For an agarose gel, under strong confinement, \({{{{{{\rm{\nu }}}}}}}_{{{{{{\rm{b}}}}}}}^{{{{{{\rm{eff}}}}}}}\) increases to an asymptotic value of 2/3, while for fibrin gel it decreases to zero, as lnλz/lnλr → 0 because λz saturates with increasing λr. Note that in experiments, a confined spherical microgel underwent non-uniform deformation, with its central part experiencing stronger compression, however, the extrapolation to large 1/λr enabled comparison between experiment and theory of uniformly deformed gels.

A further difference in the behavior of flexible-strand and filamentous gels was found for their translocation through the constriction. The translocation pressure ΔPtr normalized by gel stiffness S, increased with increasing compression (Fig. 2e), however for 2.0 ≤ 1/λr ≤ 3.5, fibrin microgels passed the constriction at substantially smaller ΔPtr/S values. Confinement of agarose microgels led to an increase in osmotic pressure, resulting in gel extension in the longitudinal direction with the stretching of the polymer molecules (Fig. 2b, left) and an increase in the translocation pressure as ΔPtr/S ∼ (1/λr)14/3 17. In contrast, the shape of the confined fibrin microgels was determined by the balance of the energy of filaments compressed radially and stretched in the longitudinal direction, which resulted in the maximum longitudinal strain λz ~\(\sqrt{{k}_{{{{{{\rm{b}}}}}}}/{k}_{{{{{{\rm{s}}}}}}}}\). For 1/λr ≫ 1, the change in translocation pressure scaled as ΔPtr/S ∼\({{\lambda }}_{{{{{{\rm{r}}}}}}}^{{-}1}{{{{{\rm{ln}}}}}}\left({{\lambda }}_{{{{{{\rm{r}}}}}}}^{{-}1}\right)\) (Supplementary Discussion Section 5.4), as shown by the solid red line in Fig. 2e. Thus, the dependence of ΔPtr on confinement was weaker than for agarose gel. For compression of 1/λr > 3.5, a significant increase in filament volume fraction and interactions of neighboring filaments constrained further gel deformation and resulted in the deviation of experimental results from the prediction (the red dotted line in Fig. 2e). We conclude that for the same 1/λr and Δ\({P}_{{{{{{{\rm{tr}}}}}}}_{{{{{{\rm{fibrin}}}}}}}}\) < ΔP < Δ\({P}_{{{{{{{\rm{tr}}}}}}}_{{{{{{\rm{agarose}}}}}}}}\), the agarose gel would be trapped in the microchannel, while a fibrin gel of the same stiffness would pass it. For ΔP < Δ\({P}_{{{{{{{\rm{tr}}}}}}}_{{{{{{\rm{fibrin}}}}}}}}\), both gels would obstruct the channel, however the fibrin gel would be pushed deeper and would experience a stronger compression, thus more effectively blocking the flow of liquid. The results shown in Fig. 2 imply that fibrous gels would act as effective plugs to reduce bleeding or suppress blood supply to the tumor.

On the other hand, fibrin forms the scaffold of blood clots that cause thromboembolism, a pathological condition in which a thrombus obstructs a blood vessel at ΔP < ΔPtr in e.g., some types of ischemic strokes (Fig. 3a). A weaker confinement-induced elongation of fibrin microgels, in comparison with flexible-strand gels, leads to a stronger increase in fibrin concentration, C/Cfibrinogen, where C and Cfibrinogen are the polymer concentrations in the confined and undeformed microgel, respectively. Figure 3b shows a more than seven-fold increase in C/Cfibrinogen at 1/λr ≈ 4.0 for SM, MM, and RM, driven by the confinement and the loss of water (Supplementary Fig. 16).

a Schematic of occlusion of a cerebral artery in the brain. b Confinement-mediated relative increase in fibrin concentration in obstructive SMs (red solid circles), MMs (black solid squares), and RMs (blue solid triangles). c Experimental design used for studies of lysis of the confined fibrin gel. A solution of fluorescently labeled tPA in TBS was infused at a flow rate of 5.6 × 107 μm3/s and an additional pressure difference of 0.7 Pa from a channel placed orthogonally to the long axis of the main microchannel. d Merged multi-channel microscopy images of an obstructive MM (D0 = 200 μm) positioned at Xf = 28 μm at ΔP = 700 Pa and subjected to digestion. Vertical dashed lines show the original positions of the back and front MM edges at tlys = 0. Green and pink colors correspond to FITC-Dextran (70 kDa) and AlexaFluor633-labeled tPA, respectively. e Temporal variation in the relative volume of occlusive RM with D0 of 174 μm (blue hollow inverted triangles), 199 μm (blue triangles), and 218 μm (blue hollow triangles), respectively, placed at Xf = 28 ± 1 μm in the tapered microchannel region at ΔP of 1200, 1800, and 3000 Pa, respectively, and Q = 1860 ± 70 μm3/s. Inset shows RM (D0 = 218 μm) blocking the microchannel. f Temporal variation in the relative volume of SM, MM, or RM (D0 = 197 ± 3 μm) placed at Xf = 32 ± 12 μm in the tapered microchannel zone at ΔP of 400, 750, and 1800 Pa and Q of 12300, 2400, and 1860 μm3/s, respectively. Xf is the front edge position of the microgel determined its distance from the beginning of the constriction. V(tlys) and V0 is temporal volume of lysed microgel and the volume of the unperturbed microgel, respectively. The colors of symbols correspond to those in b. The black arrows in e, f correspond to the last time point before the microgel passed the microchannel. Scale bars in d, e are 100 μm.

To examine the consequences of confinement on the reduction in the flux of liquid through obstructive fibrin gels, we studied lysis of SMs, MMs, and RMs that were infiltrated by with a thrombolytic agent tissue plasminogen activator (tPA). Figure 3c shows the experimental design used for lysis experiments. At ΔP = 700 Pa (<ΔPtr) and a flow rate, Q = 2400 μm3/s, of Tris-buffered saline (TBS) mixed with 0.1 mg/mL of (fluorescein isothiocyanate) FITC-Dextran, the microgel occluded the tapered microchannel region. The front edge position, Xf, of the microgel determined its distance from the beginning of the constriction, X0. To induce lysis, a solution of fluorescently labeled tPA in TBS was infused from a channel placed orthogonally to the long axis of the main microchannel.

When the tPA solution reached the occlusive MM, the back microgel edge became blurry, indicating the initiation of fibrin digestion at time tlys = 0 (Fig. 3d and Supplementary Fig. 18). During fibrinolysis, the dye-labeled tPA accumulated in the MM interior and bound to fibrin filaments26, leading to the gradually increasing intensity of the pink color of the microgel. At tlys = 60 min, the MM shrank, due to the dissolution of its back portion, while the position of its front edge, Xf, changed insignificantly. After 160 min, a strongly contracted MM moved further into the constriction, and at tlys = 161 min, it passed through the constriction, thus restoring the flow of the liquid through the microchannel (Fig. 3d and Supplementary Fig. 18, right column).

Figure 3e shows lysis-mediated time-dependent reduction in volume V(tlys) normalized by the original volume, V0, of fibrin microgels with different dimensions. An RM with D0 of 174, 199, or 218 μm was placed in the microchannel at ΔP of 1200, 1800, or 3000 Pa, respectively, and Q = 1860 ± 70 µm3/s to obstruct the microchannel (Fig. 3e, inset). With a tPA supply, the microgels gradually shrank, until they became sufficiently small to pass the channel. Longer lysis time was required for the critical volume reduction for RMs with a larger original diameter. As flux through the RMs with different dimensions was similar, lysis occurred at a similar rate, resulting in the digestion of a smaller fraction of larger RMs and their delayed translocation. Figure 3f shows the lysis-driven relative decrease in V(tlys)/V0 for SM, MM, and RM with D0 = 197 ± 3 μm, plotted as a function of tlys. Each microgel was placed the microchannel at ΔP of 400, 750, or 1800 Pa, and Q of 12300, 2400, or 1860 μm3/s for SM, MM, and RM, respectively. Even though the pressure applied to SM was 4.5-fold lower than that for RM, the flux through SM was more than six-fold stronger, due to its higher permeability, and the rate of microgel shrinkage decreased from SM to MM to RM. For example, at tlys = 78 min, the SM largely dissolved and translocated, while the MM and RM in spite of maintaining only 16 and 20% of their original volumes, respectively, continued to obstruct the microchannel. These results signify the importance of convection-mediated lysis of confined fibrous gels and correlate with reports on the faster digestion of clots with a lower fibrin content27,28.

In summary, our work shows experimentally and theoretically the mechanism of the response of filamentous gels to biaxial confinement. The behavior of fibrous gels under confinement was governed by the strong asymmetry in the deformation energy of filaments (soft upon compression and stiff upon extension) and was controlled solely by the filament aspect ratio and curvature. This response led to a minimal elongation of fibrous gels confined to narrow capillaries, a decrease in their biaxial Poisson's ratio with increasing compression, and smaller translocation pressures, compared to flexible-strand gels with similar stiffness.

Since biaxial confinement of soft deformable particles is used in a broad range of technologies29,30,31,32, our findings stimulate the development of new fibrous materials. In particular, biaxial confinement of filamentous gels in narrow capillaries or tubes would result in their strong densification and a significant reduction in permeability. A strongly suppressed liquid flux through occlusive fibrous gels offers advantages in their use as plugs for preventing bleeding or reducing blood supply to malignant tumors33,34,35. On the other hand, the reduction in the liquid flux through obstructive fibrin gels and hence, suppressed convection-mediated thrombolysis provides insight into the slow lysis of occlusive blood clots27,36,37. Our model system is the first step toward developing understanding of the consequences of the mechanical response of fibrous biopolymer hydrogels to biaxial confinement. Incorporating blood cells or platelets in obstructive fibrin gels will affect their confinement-mediated behavior38 and would be the next step in uncovering the behavior of more complex biologically relevant systems.

The reagents for the preparation of fibrin microgels and the fabrication of MF devices are described in the Supplementary Information (Supplementary Methods Section 2 and 4). Fibrin microgels were prepared using emulsification of the mixed solution of fibrinogen, Tris buffer and thrombin in a flow-focusing MF device, which was followed by droplet gelation. Bovine fibrinogen solution (60 mg/mL in TBS), Tris buffer and bovine thrombin solution (5 U/mL in 10 mM CaCl2 solution) were injected in the MF device using two independently controlled syringe pumps (PhD 200 Harvard Apparatus PHD 2000 Syringe Pump, USA). The continuous phase, F-oil containing 1 wt% of block copolymer PFPE-P(EO-PO)-PFPE, was injected into the MF device using the third syringe pump. The droplets generated in the MF device were collected in a 15 mL centrifuge tube containing F-oil. The tube was placed for 1 h in the water bath at 37 °C to complete fibrin gelation. FITC-labeled fibrin microgels were prepared from the mixture of bovine fibrinogen and FITC-labeled human fibrinogen that were mixed at the weight ratio of 33:1, respectively. The procedure was identical to that used for the preparation of fibrin microgels.

The microgels were transferred from F-oil to TBS by centrifuging the dispersion at 185 g for 2 min. The settled microgels were dispersed in F-oil mixed with 20 wt% of perfluorooctanol, and after that, in hexane containing 0.5 wt% of Span 80, hexane, aqueous 0.1 wt% Triton X solution, and TBS. Finally, the microgels were dispersed in TBS containing 0.01 wt% of Tween 20 and stored at 4 °C for ~1–2 weeks prior to the experiments.

The fabrication of the MF devices is described in the Supplementary Information (Supplementary Methods Section 5). In a typical experiment, a positive ΔP controlled by the relative heights of water reservoirs connecting upstream and downstream to the MF device, was used to introduce a microgel with a diameter 150 < D0 < 270 μm into a microchannel. The unperturbed size of the microgel was determined by imaging it in the channel-at-large. The microgel stopped in a tapered zone at the constriction entrance. A MATLAB program was used to determine the position of the microgel along the x-axis when the front microgel tip remained invariant for 2 min. Following a step-wise increase in ΔP, the microgel moved along the tapered zone, until it entered the constriction. After complete microgel insertion into the constriction, ΔP was rapidly reduced to zero by balancing the water level between the reservoirs, and the occlusive microgel was maintained in the constriction in a stationary state. The length of the obstructive microgel was measured after its 30 min confinement in the constriction.

In the course of fibrinolysis experiments, t-PA and FITC-labeled dextran solutions permeated an occlusive microgel. The flow of each liquid was monitored by individual-channel fluorescence imaging. AlexaFluor 633-labeled t-PA attached to fibrin fibers and accumulated in the interior of the shrinking fibrin microgel (TRITC channel in Supplementary Fig. 18). The solution of FITC-labeled dextran moved through the microgel without accumulation.

The data that support the findings of this study are available from the corresponding author upon request. The raw SEM images of fibrin gel, the raw TEM images of fibrin gel before and after confinement, and the source data underlying Figs. 2 and 3 are provided in the Source Data file. Source data are provided with this paper.

Alberts, B. et al. Molecular Biology of the Cell. (Garland Science, 2002).

Litvinov, R. I., Pieters, M., de Lange-Loots, Z. & Weisel, J. W. Fibrinogen and Fibrin. In Macromolecular Protein Complexes III: Structure and Function (eds. Harris, J. R. & Marles-Wright, J.) 471–501 https://doi.org/10.1007/978-3-030-58971-4_15 (Springer, Cham, 2021).

Bosman, F. T. & Stamenkovic, I. Functional structure and composition of the extracellular matrix. J. Pathol. 200, 423–428 (2003).

Article CAS PubMed Google Scholar

Prince, E. & Kumacheva, E. Design and applications of man-made biomimetic fibrillar hydrogels. Nat. Rev. Mater. 4, 99–115 (2019).

Article ADS Google Scholar

Broedersz, C. P. & Mackintosh, F. C. Modeling semiflexible polymer networks. Rev. Mod. Phys. 86, 995–1036 (2014).

Article ADS CAS Google Scholar

Hatami-Marbini, H. & Picu, C. R. Modeling the Mechanics of Semiflexible Biopolymer Networks: Non-affine Deformation and Presence of Long-range Correlations. In Advances in Soft Matter Mechanics 119–145 (Springer, Berlin, Heidelberg, 2012).

Vader, D., Kabla, A., Weitz, D. & Mahadevan, L. Strain-induced alignment in collagen gels. PLoS One 4, e5902 (2009).

Article ADS PubMed PubMed Central Google Scholar

Storm, C., Pastore, J. J., MacKintosh, F. C., Lubensky, T. C. & Janmey, P. A. Nonlinear elasticity in biological gels. Nature 435, 191–194 (2005).

Article ADS CAS PubMed Google Scholar

Sacks, M. S. Biaxial mechanical evaluation of planar biological materials. J. Elast. 61, 199 (2000).

Article Google Scholar

Licup, A. J. et al. Stress controls the mechanics of collagen networks. Proc. Natl Acad. Sci. USA 112, 9573–9578 (2015).

Article ADS CAS PubMed PubMed Central Google Scholar

Janmey, P. A. et al. Negative normal stress in semiflexible biopolymer gels. Nat. Mater. 6, 48–51 (2007).

Article ADS CAS PubMed Google Scholar

Kang, H. et al. Nonlinear elasticity of stiff filament networks: strain stiffening, negative normal stress, and filament alignment in fibrin gels. J. Phys. Chem. B 113, 3799–3805 (2009).

Article CAS PubMed PubMed Central Google Scholar

Gardel, M. L. et al. Elastic behavior of cross-linked and bundled actin networks. Science 304, 1301–1305 (2004).

Article ADS CAS PubMed Google Scholar

Sharma, A. et al. Strain-controlled criticality governs the nonlinear mechanics of fibre networks. Nat. Phys. 12, 584–587 (2016).

Article CAS Google Scholar

Vahabi, M. et al. Elasticity of fibrous networks under uniaxial prestress. Soft Matter 12, 5050–5060 (2016).

Article ADS CAS PubMed Google Scholar

Wufsus, A. R., Macera, N. E. & Neeves, K. B. The hydraulic permeability of blood clots as a function of fibrin and platelet density. Biophys. J. 104, 1812–1823 (2013).

Article ADS CAS PubMed PubMed Central Google Scholar

Li, Y. et al. Universal behavior of hydrogels confined to narrow capillaries. Sci. Rep. 5, 17017 (2015).

Article ADS PubMed PubMed Central Google Scholar

Liu, X., Li, N. & Wen, C. Effect of pathological heterogeneity on shear wave elasticity imaging in the staging of deep venous thrombosis. PLoS One 12, e0179103 (2017).

Article PubMed PubMed Central Google Scholar

Mfoumou, E., Tripette, J., Blostein, M. & Cloutier, G. Time-dependent hardening of blood clots quantitatively measured in vivo with shear-wave ultrasound imaging in a rabbit model of venous thrombosis. Thromb. Res. 133, 265–271 (2014).

Article CAS PubMed Google Scholar

Weisel, J. W. & Nagaswami, C. Computer modeling of fibrin polymerization kinetics correlated with electron microscope and turbidity observations: clot structure and assembly are kinetically controlled. Biophys. J. 63, 111–128 (1992).

Article ADS CAS PubMed PubMed Central Google Scholar

Ryan, E. A., Mockros, L. F., Weisel, J. W. & Lorand, L. Structural origins of fibrin clot rheology. Biophys. J. 77, 2813–2826 (1999).

Article CAS PubMed PubMed Central Google Scholar

Rosner, M. J., Rosner, S. D. & Johnson, A. H. Cerebral perfusion pressure: management protocol and clinical results. J. Neurosurg. 83, 949–962 (1995).

Article CAS PubMed Google Scholar

Tutwiler, V., Maksudov, F., Litvinov, R. I., Weisel, J. W. & Barsegov, V. Strength and deformability of fibrin clots: biomechanics, thermodynamics, and mechanisms of rupture. Acta Biomater. 131, 355–369 (2021).

Article CAS PubMed Google Scholar

Horinaka, J. I., Yasuda, R. & Takigawa, T. Entanglement network of agarose in various solvents. Polym. J. 43, 1000–1002 (2011).

Article CAS Google Scholar

Collet, J. P., Shuman, H., Ledger, R. E., Lee, S. & Weisel, J. W. The elasticity of an individual fibrin fiber in a clot. Proc. Natl Acad. Sci. USA 102, 9133–9137 (2005).

Article ADS CAS PubMed PubMed Central Google Scholar

Weisel, J. W. Fibrinogen and fibrin. Adv. Protein Chem. 70, 247–299 (2005).

Article CAS PubMed Google Scholar

Longstaff, C. & Kolev, K. Basic mechanisms and regulation of fibrinolysis. J. Thromb. Haemost. 13, S98–S105 (2015).

Article CAS PubMed Google Scholar

Diamond, S. L. Engineering design of optimal strategies for blood clot dissolution. Annu. Rev. Biomed. Eng. 1, 427–462 (1999).

Article CAS PubMed Google Scholar

Villone, M. M., Nunes, J. K., Li, Y., Stone, H. A. & Maffettone, P. L. Design of a microfluidic device for the measurement of the elastic modulus of deformable particles. Soft Matter 15, 880–889 (2019).

Article ADS CAS PubMed Google Scholar

Goy, C. B., Chaile, R. E. & Madrid, R. E. Microfluidics and hydrogel: A powerful combination. React. Funct. Polym. 145, 104314 (2019).

Article CAS Google Scholar

Zhang, Z., Xu, J. & Drapaca, C. Particle squeezing in narrow confinements. Microfluid. Nanofluidics 22, 120 (2018).

Article Google Scholar

Portnov, I. V., Möller, M., Richtering, W. & Potemkin, I. I. Microgel in a pore: Intraparticle segregation or snail-like behavior caused by collapse and swelling. Macromolecules 51, 8147–8155 (2018).

Article ADS CAS Google Scholar

Varju, I. et al. Hindered dissolution of fibrin formed under mechanical stress. J. Thromb. Haemost. 9, 979–986 (2011).

Article CAS PubMed PubMed Central Google Scholar

Weisel, J. W. Stressed fibrin lysis. J. Thromb. Haemost. 9, 977–978 (2011).

Article CAS PubMed PubMed Central Google Scholar

Adhikari, A. S., Mekhdjian, A. H. & Dunn, A. R. Strain tunes proteolytic degradation and diffusive transport in fibrin networks. Biomacromolecules 13, 499–506 (2012).

Article CAS PubMed PubMed Central Google Scholar

Poursaid, A., Jensen, M. M., Huo, E. & Ghandehari, H. Polymeric materials for embolic and chemoembolic applications. J. Control. Release 240, 414–433 (2016).

Article CAS PubMed PubMed Central Google Scholar

Weisel, J. W. & Litvinov, R. I. The biochemical and physical process of fibrinolysis and effects of clot structure and stability on the lysis rate. Cardiovasc. Hematol. Agents Med. Chem. 6, 161–180 (2008).

Article CAS PubMed Google Scholar

van Oosten, A. S. G. et al. Emergence of tissue-like mechanics from fibrous networks confined by close-packed cells. Nature 573, 96–101 (2019).

Article ADS PubMed Google Scholar

Download references

Y.L. acknowledges Ontario Trillium Scholarship. Y.F.L. thanks Banting Postdoctoral Fellowship program (NSERC Canada). E.P. is grateful for the NSERC Canada Graduate Scholarship (Doctoral Program). EK and AR appreciate financial support of this work by NSERC Canada via Discovery and Canada Research Chair programs. AR acknowledges the Grant-in-Aid from the Canadian Lung Association. MR appreciates financial support of National Science Foundation (grant EFMA-1830957) and National Institutes of Health (grant P01-HL108808).

Yang Li

Present address: Department of Orthopaedics, University Medical Center Utrecht, Utrecht University, Heidelberglaan 100, 3584 CX, Utrecht, The Netherlands

Yunfeng Li

Present address: State Key Laboratory of Supramolecular Structure and Materials, College of Chemistry, Jilin University, 2699 Qianjin Street, Changchun, 130012, China

Elisabeth Prince

Present address: Department of Chemistry, Massachusetts Institute of Technology, 88 Ames Street, Apartment 306, Cambridge, MA, 02142, USA

Department of Chemical Engineering & Applied Chemistry, University of Toronto, 200 College Street, Toronto, ON, M5S 3E5, Canada

Yang Li, Arun Ramachandran & Eugenia Kumacheva

Department of Chemistry, University of Toronto, 80 Saint George Street, Toronto, ON, M5S 3H6, Canada

Yunfeng Li, Elisabeth Prince & Eugenia Kumacheva

Thrombosis and Atherosclerosis Research Institute, 237 Barton Street East, Hamilton, L8L 2 × 2, ON, Canada

Jeffrey I. Weitz

Department of Biochemistry and Biomedical Sciences, McMaster University, 1280 Main Street West, Hamilton, ON, L8S 4K1, Canada

Jeffrey I. Weitz

Department of Medicine, McMaster University, 1200 Main Street West, Hamilton, ON, L8N 3Z5, Canada

Jeffrey I. Weitz

P. N. Lebedev Physics Institute, Russian Academy of Sciences, 53 Leninskiy Prospekt, Moscow, 119991, Russian Federation

Sergey Panyukov

Department of Mechanical Engineering and Materials Science, Duke University, Durham, NC, 27708, USA

Michael Rubinstein

Department of Biomedical Engineering, Duke University, Durham, NC, 27708, USA

Michael Rubinstein

Department of Chemistry, Duke University, Durham, NC, 27708, USA

Michael Rubinstein

Department of Physics, Duke University, Durham, NC, 27708, USA

Michael Rubinstein

World Primer Institute for Chemical Reaction Design and Discovery (WPI-ICReDD), Hokkaido University, Sapporo, Hokkaido, 001-0021, Japan

Michael Rubinstein

Institute of Biomedical Engineering, University of Toronto, 164 College Street, Toronto, ON, M5S 3G9, Canada

Eugenia Kumacheva

You can also search for this author in PubMed Google Scholar

Y.L., Y.F. L., and E.P. performed experiments. Y.L. performed data analyses for theroetical modeling. A.R., S. P., and M.R. performed theoretical modeling. J. W. discussed and interpreted the experimental results E.K. supervised and directed the research. All authors contributed to the manuscript.

Correspondence to Arun Ramachandran, Michael Rubinstein or Eugenia Kumacheva.

The authors declare no competing interests.

Nature Communications thanks Jian Ping Gong and the other, anonymous, reviewer(s) for their contribution to the peer review of this work.

Publisher's note Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.

Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made. The images or other third party material in this article are included in the article's Creative Commons license, unless indicated otherwise in a credit line to the material. If material is not included in the article's Creative Commons license and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this license, visit http://creativecommons.org/licenses/by/4.0/.

Reprints and Permissions

Li, Y., Li, Y., Prince, E. et al. Fibrous hydrogels under biaxial confinement. Nat Commun 13, 3264 (2022). https://doi.org/10.1038/s41467-022-30980-7

Download citation

Received: 25 January 2022

Accepted: 19 May 2022

Published: 07 June 2022

DOI: https://doi.org/10.1038/s41467-022-30980-7

Anyone you share the following link with will be able to read this content:

Sorry, a shareable link is not currently available for this article.

Provided by the Springer Nature SharedIt content-sharing initiative

By submitting a comment you agree to abide by our Terms and Community Guidelines. If you find something abusive or that does not comply with our terms or guidelines please flag it as inappropriate.

Blog